EasyManuals Logo

Toshiba E-STUDIO 3510C Guide

Toshiba E-STUDIO 3510C
346 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background imageLoading...
Page #139 background image
Setting up from TopAccess 137
4) Auto Configuration
This equipment can obtain multiple IPv6 addresses from the DHCPv6 server and routers
automatically. In this mode, up to 9 IPv6 addresses can be registered on this equipment.
y Up to 7 IPv6 addresses can be obtained from routers. One IPv6 address can be obtained
from the DHCPv6 server. One link local address is also generated automatically.
y In "AUTO" mode, you cannot assign "IP ADDRESS", "PREFIX" and "GATEWAY" manu-
ally.
y If the selected IPv6 address is already assigned, DAD (Duplicate Address Detection)
detects it and notifies you on the control panel of this equipment.
5) Use Stateless Address
Use the IPv6 addresses (Stateless addresses) issued from routers.
- Keep Configuration(If router setting is changed) — Select the method on how to han-
dle IPv6 address data when new IPv6 address is provided from the same router provid-
ing the current IPv6 address to this equipment.
- Use DHCPv6 Server for IP Address(M flag) — Use the IPv6 address issued from the
DHCPv6 server in the stateless network environment.
- Use DHCPv6 Server for Options(O flag) — Use the optional information (IPv6 address
for the DNS server, etc.) issued from the DHCPv6 server in the stateless network envi-
ronment.
- IP Address — Stateless Addresses obtained from routers are displayed. Up to 7 IPv6
addresses can be retained.
When this equipment receives a router advertisement (RA) from a router, of which M flag
configuration is “0”, the DHCPv6 function is disabled. If you change a router advertisement
(RA) M flag configuration from “0” to “1”, it is required to reboot this equipment to enable the
DHCPv6 function.
6) Use Stateful Address
Use the Stateful address issued from DHCPv6 server.
- Use DHCPv6 Server for IP Address — Select whether or not the IPv6 address which is
issued from the DHCPv6 server is used for this equipment.
- Use DHCPv6 Server for Options — Select whether or not the optional information (IPv6
address for the DNS server, etc.) except the IPv6 address for this equipment, which is
issued from the DHCPv6 server is used on this equipment.
- IP Address — A stateful address, Prefix Length and Gateway1-7 obtained from DHCPv6
Server are displayed.

Table of Contents

Other manuals for Toshiba E-STUDIO 3510C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba E-STUDIO 3510C and is the answer not in the manual?

Toshiba E-STUDIO 3510C Specifications

General IconGeneral
BrandToshiba
ModelE-STUDIO 3510C
CategoryAll in One Printer
LanguageEnglish

Related product manuals