E6582062
6-145 6. [Advanced] How to use parameters
3
4
6
9
Memo
• Cumulative power ON time, cumulative fan run time, and cumulative run time can be checked
in the [Monitor mode]. For details, refer to [8. 1. 1].
• Monitor value of cumulative fan run time and cumulative run time can be reset to 0 (zero) by the
setting of <tyP: Default setting>. For details, refer to [5. 2. 9].
Reference
• How to operate the operation panel -> Refer to [3. 1. 1].
• How to switch display mode on the operation panel -> Refer to [3. 1. 2].
• Procedure to change parameter setting -> Refer to [4. 2. 3]
• Details on operation by external signals -> Refer to [Chapter 7].
To Next Page
Loading...
