Toshiba TOSVERT VF-AS3 User Manual

E6582062
6-171 6. [Advanced] How to use parameters
3
4
6
9
6. 34. 5 Selecting data displayed in [Standard mode]
<F710: Standard mode display>
<F720: Standard mode display of extension panel>
<F723: Status area display of operation panel>
Different contents can be displayed on the operation panel of the inverter unit and the extension panel
(optional).
You can set the content displayed on Status area on the operation panel.
For details, refer to [5. 4. 3].
6. 34. 6 Changing display in [Monitor model]
<F711: Monitor mode 1 display> to <F718: Monitor mode 8 display>
Change the display items in [Monitor mode].
For details, refer to [8. 1. 1].

Toshiba TOSVERT VF-AS3 Specifications

General

Model	TOSVERT VF-AS3
Category	Inverter
Overload Capacity	150% for 60 seconds
Cooling Method	Forced Air Cooling
Control Method	V/f control, Sensorless vector control
Braking Unit	Built-in
Communication Protocols	Modbus RTU, DeviceNet, Profibus DP
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault
Enclosure	IP20
Operating Temperature	-10°C to +50°C
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m