E6582062
11-5 11. Table of parameters
1
3
9
10
11
*1 Parameter values vary depending on the capacity. For details, refer to [11.6].
*2 Depending on the setup menu. Refer to [11.10].
*3 For details on the analog output and monitor output function, refer to [11.7].
*4 Refer to section [11.8] for details about the input terminal function.
*5 Refer to section [11.9] for details about the output terminal function.
*6 Y: writable N: Not writable
tyP 0007
Default
setting
0: -
1: 50Hz setting
2: 60Hz setting
3: Default setting 1
4: Clear past trips
5: Clear cumulative run time
6: Initialize type form
7: Store user settings
8: Rewrite user settings
9: Clear cumulative fan run
time
10,11: -
12: Clear number of starting
13: Default setting 2
(complete initialization)
14: Clear number of external
equipment starting
15: Clear cumulative
overcurrent time
- - 0 N [5. 2. 9]
SEt 0099
Region
setting check
0: Setup menu starting
1: Japan (read only)
2: Mainly North America
(read only)
3: Mainly Asia (read only)
4: Mainly Europe (read only)
5: Mainly China (read only)
- - 0 N [5. 3. 10]
PSEL 0050
Parameter
mode select
0: Setting mode at power on
1: Easy mode at power on
2: Easy mode only
- - 0 Y [5. 2. 8]
F1-- - Head of F100 - - - - -
[11. 3]
F2-- - Head of F200 - - - - -
F3-- - Head of F300 - - - - -
F4-- - Head of F400 - - - - -
F5-- - Head of F500 - - - - -
F6-- - Head of F600 - - - - -
F7-- - Head of F700 - - - - -
F8-- - Head of F800 - - - - -
F9-- - Head of F900 - - - - -
A--- - Start of A - - - - - [11. 4]
C--- - Start of C - - - - - [11. 5]
GrU -
Changed
parameters
search & edit
------
Title
Communication
No.
Parameter
name
Adjustment range Unit
Minimum
setting unit
(Panel/
Communication
)
Default
setting
Write
during
running
*6
User
setting
Reference
To Next Page
Loading...
