Need help?Do you have a question about the TRIATEK FMS-1650 and is the answer not in the manual?
General| Brand | TRIATEK |
|---|---|
| Model | FMS-1650 |
| Category | Controller |
| Language | English |
Details physical and environmental specifications of the FMS-1650 controller, including LCD size, resolution, and mechanical dimensions.
Details how to configure primary controller functions like analog inputs, outputs, PID loops, alarms, and engineering units.
Covers settings specific to the monitored space, like isolation mode, occupancy state, and editing room names.
Explains how to configure network parameters like baud rate and MAC address for BACnet or Metasys N2 protocols.
Describes how to configure secondary analog inputs for various sensor types like pressure, flow, humidity, and temperature.
Details the configuration of secondary analog outputs for control applications, including remapping and action modes.
Explains how to configure secondary digital inputs for door switches, occupancy switches, or auxiliary inputs.
Covers the configuration of secondary relay outputs for trigger modes, setpoints, and delays.
Details how to fine-tune PID constants (Proportional, Integral, Derivative) for secondary control loops.
Explains how to set up visual and audible alarms for analog and thermistor inputs, including alarm enables and setpoints.
Covers adding, editing, and deleting user access level passwords for system security and configuration access.
Allows customization of the main display, including selecting display modes and sources for parameters.
Allows manual control of analog and relay outputs for testing and verification purposes.
Details wiring requirements and setup for common applications using external devices like sensors and actuators.
Describes how to configure the FMS-1650's analog inputs, thermistors, and outputs for specific applications.
To Next Page
