SYSTEM SETUP
FMS-1650
TRIATEK reserves the right to change product specifications without notice.
- 38 -
The FMS-1650 room pressure controller incorporates a system
security password facility to prevent unauthorized access to the
system menus and configuration settings. The password facility has
a capacity of ten (10) unique, multiple access level passwords. The
Password Setup option on the System Setup menus allows the user to
manage the system passwords including adding, editing, and deleting
entries from the system (Figure 71). The following sections discuss
the use of the four options on the Password Setup menu.
Adding a New Password
To add a new password entry, select the Add Password option from the
Password Setup menu. At the password entry screen shown in Figure
70, enter at least four (4) and up to eight (8) digits to define a new
entry. Assuming the entry is unique, clicking the Next button advances
to the Set Menu Access Level configuration popup as shown in Figure
72. If the entry is invalid or not unique, the warning buzzer will sound
and the password entry screen will reset to accept a new entry.
After a successful password entry has been entered, select one of four
menu access levels for the new entry.
• Unrestricted Access grants the password owner full access to the
user menu system with no restrictions. This access level should
be used for any passwords established for building management
personnel, managers, or any other individuals who would need full
unrestricted access to the user menus.
• Standard Access level restricts the user from accessing a very
limited number of administrative menu options.
• Basic Access offers a more restricted access to the user menu
system, but allows minimal access to options that affect the
configuration settings.
• Restricted Access limits the access level of the user to a few
view-only menu options, and restricts access to any options that
may affect configuration settings in the unit.
Click OK to save the new password entry and return to the Password
Setup menu.
Editing an Existing Password
To edit the user level for an existing password entry, the password
being modified must be used to enter the user menu system. Select
the Edit Password option from the Password Setup menu, and select
Figure 70. Password
entries can contain
between 4 and 8 digits.
Figure 71. Passwords
may be added, edited,
or deleted from the
Password Setup menu.
Managing System Passwords