DISPLAY SETUP
FMS-1650
TRIATEK reserves the right to change product specifications without notice.
- 49 -
(For overview, see FLOW DIAGRAMS - Page 77)
Selecting the Set Brightness option on the Display Setup menus
invokes the Set Backlight Level popup slider as shown in Figure
90. To increase the brightness of the display, move the slider to the
left. Moving the slider to the right reduces the brightness down to a
minimum level that remains visible. Clicking the OK button saves the
new brightness setting to non-volatile memory, which allows the display
to return to this brightness level even if a power loss is experienced.
Enabling the Screensaver Option
Selecting the Screensaver option on the Display Setup menus invokes
the Screensaver Mode popup screen as shown in Figure 91. To
minimize or eliminate the long-term effects of burn-in on the main
display screen, this option should be enabled. When screensaver
mode is enabled, a popup splash screen with custom logo graphic (if
available) is displayed for 10 seconds on the main screen every 90
seconds. This effectively prevents the static information on the main
display screen from being “burned in” to the pixels of the LCD screen.
Figure 90. The display
brightness may be
adjusted using this
slider.
Figure 91. The
screensaver mode
minimizes long-term
effects of burn-in
on the main display
screen.
Additional Display Options
To Next Page
Loading...
Need help?
General
