TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 97 Copyright 2013 All Rights Reserved.
Message Translation Protocols
 ~#
Description
The beginning identifier (~#) of the prompt message is sent from the printer to the KP-200 portable
keyboard. The ending identifier is ~&. @0 following the ending identifier ~& is used to instruct
keyboard to display the prompt in the first line of LCD display. @1 following the ending identifier ~& is
used to instruct keyboard to display the prompt in the first line of LCD display. If @0 or @1 are not
present, prompt string will be displayed in first line of LCD and input data will be displayed in second
line of LCD.
Syntax
~#Prompt~&[@0]
~#Prompt~&[@1]
Parameter Description
None N/A
Example
Sample code
DOWNLOAD "A.BAS"
OUT "~#KP-200~&@0"
OUT "~#Testing~&@1"
EOP
A
Result
See Also
INPUT, OUT

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)