TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 183 Copyright 2013 All Rights Reserved.
 SET PEEL
Description
This setting is used to enable/disable the self-peeling function. The default setting for this function is
off. When this function is set on, the printer stops after each label printing, and does not print the next
label until the peeled label is taken away. This setting will be saved in printer memory when turning off
the power.
Syntax
SET PEEL ON/OFF
Parameter
Description
ON
Enable the self-peeling function
OFF
Disable the self-peeing function
Example
Sample code
REM ***SELF-PEELING FUNCTION ON***
SIZE 4,4
GAP 0,0
DENSITY 8
SPEED 6
DIRECTION 0
REFERENCE 0,0
SET CUTTER OFF
SET PEEL ON
CLS
TEXT 50,100,"3",0,1,1,"SELF-PEELING FUNCTION TEST"
PRINT 5
See Also
OFFEST, PRINT

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)