TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 105 Copyright 2013 All Rights Reserved.
 EOP
Description
End of program. To declare the start and end of BASIC language commands used in a program,
DOWNLOAD "FILENAME.BAS " must be added in the first line of the program, and "EOP " statement at
the last line of program.
Syntax
EOP
Example
Sample code (The example program listed below will download to printer SDRAM.)
DOWNLOAD "DEMO.BAS"
SIZE 4,4
GAP 0,0
DIRECTION 1
SET TEAR ON
CLS
TEXT 100,100,"3",0,1,1,"DEMO PROGRAM"
PRINT 1
EOP
See Also
DOWNLOAD, INPUT, FILES, ~!F

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)