TSC TTP-244 Plus

TSC AUTO ID Technology Co., Ltd. 197 Copyright 2013 All Rights Reserved.
 SET FEED_LEN
Description
This command can set the feeding length when FEED key is pressed. This setting will be memorized by
printer. The initialized value is the label length.
Syntax
SET FEED_LEN n
Parameter
Description
n
The feeding length in dot.
Note:
This command has been supported since V5.10 EZ and later firmware.
Example
Sample code
SET FEED_LEN 100
Result
The feeding length is 100 dots when you press the FEED button after this setting.