TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 149 Copyright 2013 All Rights Reserved.
 OUT
Description
This command returns data through the specific port.
Syntax
OUT [port] "prompt",variable
OUT [port] "prompt";variable
Parameter
Description
port
Optional. Specified the port for returning data/string. Default is returning
the data/string from the port which is sending data to printer.
COM: Returning data/string from COM port.
USB: Returning data/string from USB port.
NET: Returning data/string from LAN port.
prompt
Prompt string.
variable
The output message.
,
The "prompt" and "variable" are separated by <0x0D><0x0A>.
;
The "variable" comes behind "prompt" directly.
Note:
This command has been supported since V6.93 EZ and later firmware.
Example
Sample Code
OUT USB "USB: ";"This is returning data from USB."
OUT COM "COM";"This is returning data from COM."
OUT NET "NET:";"This is returning data from LAN."
Result

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)