TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 29 Copyright 2013 All Rights Reserved.
 SELFTEST
Description
At this command, the printer will print out the printer information.
Syntax
SELFTEST [page]
Parameter
Description
page
omitted: Print a self-test page with whole printer information.
PATTERN: Print a pattern to check the status of print head heat line.
ETHERNET: Print a self-test page with Ethernet settings.
WLAN: Print a self-test page with Wi-Fi settings.
RS232: Print a self-test page with RS-232 settings.
SYSTEM: Print a self-test page with printer settings.
Z: Print a self-test page with emulated language settings.
Example
Sample code
Result
SELFTEST

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)