To Next Page

To Previous Page

 WLAN SSID

Description

This command is used to set the SSID of your wireless network into Wi-Fi module. Restart the printer is

necessary.

Syntax

WLAN SSID "ssid"

Parameter

Description

ssid

In WLAN MODE INFRASTRUCTURE, it is the SSID of your wireless network.

In WLAN MODE AD-HOC, it is the SSID of Wi-Fi module.

Note:

SSID is case-sensitive. The maximum length is 32 bytes.

Example

Sample code

WLAN SSID "TEST-AP"

SELFTEST WLAN

Result

Other manuals for TSC TTP-244 Plus

Questions and Answers:

Need help?

Do you have a question about the TSC TTP-244 Plus and is the answer not in the manual?

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)