TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 26 Copyright 2013 All Rights Reserved.
 SOUND
Description
This command controls the sound frequency of the beeper. There are 10 levels of sounds. The timing
control can be set by the "interval" parameter.
Syntax
SOUND level,interval
Parameter
Description
level
Sound level: 0~9
interval
Sound interval: 1~4095
Example
Sample code
 SOUND 5,200
 SOUND 3,200
 SOUND 3,200
 SOUND 4,200
 SOUND 2,200
 SOUND 2,200
 SOUND 1,200
 SOUND 2,200
 SOUND 3,200
 SOUND 4,200
 SOUND 5,200

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)