TSC TTP-244 Plus

TSC AUTO ID Technology Co., Ltd. 20 Copyright 2013 All Rights Reserved.
 FEED
Description
This command feeds label with the specified length. The length is specified by dot.
Syntax
FEED n
Parameter
Description
n
unit: dot
1 ≤ n ≤ 9999
Note:
200 DPI: 1 mm = 8 dots
300 DPI: 1 mm = 12 dots
Example
Sample code
FEED 40
See Also
BACKFEED, SIZE, GAP, BLINE, HOME, FORMFEED