TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 34 Copyright 2013 All Rights Reserved.
Label Formatting Commands
 BAR
Description
This command draws a bar on the label format.
Syntax
BAR x,y,width,height
Parameter
Description
x
The upper left corner x-coordinate (in dots)
y
The upper left corner y-coordinate (in dots)
width
Bar width (in dots)
height
Bar height (in dots)
Note:
 200 DPI: 1 mm = 8 dots
300 DPI: 1 mm = 12 dots
 Recommended max. bar height is 12 mm at 4” width. Bar height over 12 mm may damage
the power supply and affect the print quality.
 Max. print ratio is different for each printer model. Desktop and industrial printer print
ratio is limited to 20% and 30% respectively.
Example
Sample code
SIZE 50 mm,25 mm
GAP 3 mm,0
DIRECTION 1
CLS
BAR 80,80,300,100
PRINT 1,1
Result
See Also
BOX
80
80
100
300

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)