TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 127 Copyright 2013 All Rights Reserved.
 PUT
Description
One byte is appended into file.
Syntax
PUT file handle,var1$[, var2$][,var3$][, …]
PUT file handle,var1[, var2][,var3][, …]
PUT file handle,var1$[, var2$][,var3][, …]
Parameter
Description
file handle
0 or 1
var$
Data is a character
var
Data is ASCII value
Note:
This command has been supported since V6.91 EZ and later firmware.
Example
Sample code
DOWNLOAD "DATA1",10,1234567890
DOWNLOAD "TEST.BAS"
str1$ = ""
str2$ = ""
OPEN "DATA1",0
SEEK 0,0
READ 0,str1$
PUT 0,"a","B",49
SEEK 0,0
READ 0,str2$
CLOSE 0
SIZE 4,0.5
GAP 0,0
CLS
TEXT 10, 10,"3",0,1,1,"Original data in DATA1: "+str1$
TEXT 10, 60,"3",0,1,1,"New data in Data1: "+str2$
PRINT 1
EOP
TEST
Result
See Also
DOWNLOAD, EOP, OPEN, READ, EOF, LOF(), SEEK, GET

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)