TSC TTP-244 Plus

TSC AUTO ID Technology Co., Ltd. 145 Copyright 2013 All Rights Reserved.
 PREINPUT
Description
This command can define the start character for command INPUT.
Syntax
PREINPUT var$
PREINPUT CHR$(n)
Parameter
Description
var$
The specific character or string in front of data.
n
n = 1 ~ 255
Note:
This command has been supported since V6.81 EZ and later firmware.
Example
PREINPUT "<"
PREINPUT CHR$(2)
See also
POSTINPUT, INPUT, SET FILTER