TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 49 Copyright 2013 All Rights Reserved.
 ERASE
Description
This command clears a specified region in the image buffer.
Syntax
ERASE x,y,x_width,y_height
Parameter
Description
x
The x-coordinate of the starting point (in dots)
y
The y-coordinate of the starting point (in dots)
x_width
The region width in x-axis direction (in dots)
y_height
The region height in y-axis direction (in dots)
Example
Sample code
SIZE 4,2.5
GAP 0,0
DIRECTION 1
CLS
BAR 100,100,300,300
ERASE 150,150,200,200
PRINT 1,1
Result
See Also
CLS

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)