TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 130 Copyright 2013 All Rights Reserved.
 FOR…NEXT LOOP
Description
Loop is used to execute one or more lines of program repetitively. A loop counter value specifies the
number of executions. Nested loops are allowed (up to 39 nested loops) in this printer. Jumping out in
the middle of the FOR…NEXT loop is prohibited.
Syntax
FOR variable = start TO end STEP increment
statement; start < end
[EXITFOR]
NEXT
Parameter
Description
variable
The variable name is (up to 8 characters)
start
Integer or floating point numbers
end
Integer of floating point numbers
increment
Integer or floating point, positive or negative
EXITFOR
Exit for loop
Example
Sample code
DOWNLOAD "TEST.BAS"
SIZE 4,2.5
GAP 0,0
CLS
FOR I=1 TO 10 STEP 1
TEXT 100,10+30*(I-1),"3",0,1,1,STR$(I)
NEXT
FOR I=1 TO 1000 STEP 100
TEXT 200,10+((I-1)/10)*3,"3",0,1,1,STR$(I)
NEXT
FOR I=110 TO 10 STEP -10
TEXT 300,10+(ABS(I-110))*3,"3",0,1,1,STR$(I)
NEXT
FOR I=1 TO 5 STEP 0.5
IF I-INT(I)=0 THEN Y=10+60*(I-1) ELSE Y=Y+30
TEXT 400,Y,"3",0,1,1,STR$(I)
NEXT
PRINT 1
EOP
TEST
Result
See Also
DOWNLOAD, EOP

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)