TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 123 Copyright 2013 All Rights Reserved.
 SEEK
Description
This command shifts the specified file pointer to a certain position.
Syntax
SEEK file handle,offset
Parameter
Description
file handle
0 or 1
offset
the offset characters which are shifted to a new position
Example
Sample code
DOWNLOAD "DATA",12,1234567890
DOWNLOAD "TEST.BAS"
SIZE 4,1.5
GAP 0,0
DIRECTION 1
REFERENCE 0,0
CLS
OPEN "DATA",0
SEEK 0,4
READ 0,Num$
TEXT 100,10,"3",0,1,1,"SEEK COMMAND TEST"
BAR 100,40,300,4
TEXT 100,60,"3",0,1,1,"SHIFT 4 CHARACTERS"
TEXT 100,110,"3",0,1,1,Num$
BAR 100,140,300,4
SEEK 0,0
READ 0,Num$
TEXT 100,160,"3",0,1,1,"SHIFT 0 CHARACTERS"
TEXT 100,210,"3",0,1,1,Num$
PRINT 1
EOP
TEST
Result
See Also
DOWNLOAD, EOP, OPEN, READ, EOF, LOF, FREAD$()

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)