TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 131 Copyright 2013 All Rights Reserved.
 WHILE…WEND
Description
Executes a series of statements as long as a given condition is True. Nested loops are allowed (up to 39
nested loops) in this printer.
Syntax
WHILE condition
[statement]
WEND
Parameter
Description
condition
Available relational operator: <, >, =, <=, >=, <>
*Relational operator <>, not equal, was supported since V5.10 EZ.
statement
One or more statements executed while condition is True.
Note:
This command has been supported since V5.10 EZ and later firmware.
Example
Sample Code
Result
DOWNLOAD "TEST.BAS"
I=0
TOTAL=0
WHILE I<100
I=I+1
TOTAL=TOTAL+I
WEND
SIZE 4,0.5
GAP 0,0
CLS
TEXT 10,10,"3",0,1,1,"1+2+3+ ... + 100 = " +STR$(TOTAL)
PRINT 1
EOP
TEST
DOWNLOAD "TEST.BAS"
data$ =""
SIZE 4,0.3
GAP 0,0
DIRECTION 1
INPUT "Data:",data$
WHILE data$ <> "Quit"
CLS
TEXT 10,10,"3",0,1,1,"Data: "+data$
PRINT 1
INPUT "Data:",data$
WEND
CLS
TEXT 10,10,"3",0,1,1,"Quit BAS"
PRINT 1
EOP
TEST
12345
67890
quit
Quit

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)