To Next Page

To Previous Page

 INSTR ( )

Description

Returns an integer specifying the start position of the first occurrence of one string within another.

Syntax

INSTR ([start,]str1$,str2$)

Parameter

Description

start

Optional. Numeric expression that sets the starting position for each search.

If omitted, search begins at the first character position. The stat index is 1 -

based.

str1$

Required. String expression being searched.

str2$

Required. String expression sought.

Note:

This command has been supported since V6.59 EZ and later firmware.

Example

Sample code

DOWNLOAD "DEMO.BAS"

string$="ABC123ABC123"

searchfor$="123"

starpos=8

temp1=INSTR(string$,searchfor$)

temp2=INSTR(starpos,string$,searchfor$)

str1$=searchfor$+" in "+string$+" is "+STR$(temp1)

str2$=searchfor$+" in "+string$+" after"+STR$(starpos)+" is "+STR$(temp2)

SIZE 4,1

GAP 0,0

DIRECTION 1

CLS

TEXT 10,10,"3",0,1,1,str1$

TEXT 10,60,"3",0,1,1,str2$

PRINT 1

EOP

DEMO

Result

Other manuals for TSC TTP-244 Plus

Questions and Answers:

Need help?

Do you have a question about the TSC TTP-244 Plus and is the answer not in the manual?

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)