TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 140 Copyright 2013 All Rights Reserved.
 GOTO
Description
This command is used to branch to a specified label. The label cannot exceed 8 characters in length.
Syntax
GOTO LABEL
:LABEL
Parameter
Description
LABEL
Beginning of the point. The maximum length of the label is 8 characters.
Example
Sample code
DOWNLOAD "GOTO1.BAS"
SIZE 4,3
GAP 0,0
DIRECTION 1
CLS
A=0
TOTAL=0
:START
IF A<100 THEN
GOTO SUM
ELSE
GOTO PRTOUT
ENDIF
:SUM
A=A+1
TOTAL=TOTAL+A
GOTO START
:PRTOUT
B$="THE SUMMATION OF 1..100 IS
"+STR$(TOTAL)
TEXT 10,100,"3",0,1,1,B$
PRINT 1
END
EOP
Result
See Also
DOWNLOAD, EOP, END, GOSUB…RETURN

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)