TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 163 Copyright 2013 All Rights Reserved.
 TEXTPIXEL( )
Description
Returns the width of the text string in dot.
Syntax
TEXTPIXEL (cont$,font$,size)
Parameter
Description
cont$
The content of text string.
font $
The font type. Please refer to the parameter font in command TEXT.
size
The font size. Please refer to the parameter x-multiplication in command
TEXT.
Note:
This command has been supported since V6.61 EZ and later firmware.
Example
See Also
TEXT, BARCODEPIXEL()
Sample code
DOWNLOAD "TEST.BAS"
str$="ABCDEFG"
font$="3"
fontsize=3
strwidth=TEXTPIXEL(str$,font$,fontsize)
SIZE 4,1
GAP 0,0
DIRECTION 1
CLS
TEXT 10,10,font$,0,fontsize,fontsize,str$
REVERSE 8,8,strwidth,72
PRINT 1
EOP
TEST
Result

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)