To Next Page

To Previous Page

 SET FILTER ON/OFF

Description

This command is using to enable/disable commands PREINPUT and POSTINPUT.

Syntax

SET FILTER ON/OFF

Parameter

Description

Enable PREINPUT and POSTINPUT

OFF

Disable PREINPUT and POSTINPUT

Note:

This command has been supported since V6.81 EZ and later firmware.

Example

Sample Code

DOWNLOAD "TEST.BAS"

PREINPUT "<="

POSTINPUT "=>"

SET FILTER ON

START:

INPUT "DATA",data1$

SIZE 4,0.25

GAP 0,0

DIRECTION 1

CLS

TEXT 10,10,"3",0,1,1,"DATA = "+data1$

PRINT 1

GOTO START

EOP

TEST

<=1234=><=5678=><=9012=>

Result

Other manuals for TSC TTP-244 Plus

Questions and Answers:

Need help?

Do you have a question about the TSC TTP-244 Plus and is the answer not in the manual?

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)