TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 108 Copyright 2013 All Rights Reserved.
KILL F, "FILENAME " : Delete the specify file in FLASH.
KILL E, "*.PCX " : Delete all PCX file in extension memory card.
 For TSPL printers, please send MOVE command to printer after sending KILL command.
Example
Users can use printer SELFTEST utility to list printer configurations and files saved in the printer
memory, or use the FILES command to print the downloaded file list in printer. Follow the steps below
to delete files in the printer memory via parallel port connection.
C:\>COPY CON LPT1<ENTER>
FILES<ENTER>
<CTRL><Z><ENTER>
C:\>COPY CON LPT1<ENTER>
KILL "DEMO.BAS " <ENTER>
<CTRL><Z><ENTER>
C:\>COPY CON LPT1<ENTER>
FILES<ENTER>
<CTRL><Z><ENTER>
Note: <ENTER> stands for PC keyboard “ENTER” key. <CTRL><Z> means to hold PC keyboard “CTRL”
key then press the PC keyboard <Z> key
See Also
~!F, FILES

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)