TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 137 Copyright 2013 All Rights Reserved.
NEXT
TEXT 100,110,"3",0,1,1,"(1) 1+2+3+...+100="+STR$(A)
TEXT 100,160,"3",0,1,1,"(2) 1+3+5+...+99="+STR$(B)
TEXT 100,210,"3",0,1,1,"(3) 2+4+6+...+100="+STR$(C)
TEXT 100,260,"3",0,1,1,"(4) 3+6+9+...+99="+STR$(D)
TEXT 100,310,"3",0,1,1,"(5)
5+10+15+...+100="+STR$(E)
TEXT 100,360,"3",0,1,1," (1)-(5)="+STR$(F)
TEXT 100,410,"3",0,1,1,"(6) 7+14+21+...+98="+STR$(G)
TEXT 100,460,"3",0,1,1,"(7)
17+34+51+...+85="+STR$(H)
TEXT 100,510,"3",0,1,1,"(8) 27+54+...+81="+STR$(J)
TEXT 100,560,"3",0,1,1,"(9) 37+74="+STR$(K)
TEXT 100,610,"3",0,1,1,"
(1)-(6)-(7)-(8)-(9)="+STR$(L)
PRINT 1,1
EOP
DOWNLOAD F,"TEST.BAS"
SIZE 4,1
GAP 0,0
DIRECTION 1
CLS
A=85
B=10
:START
IF A<100 THEN GOTO L1 ELSE GOTO L2
:L1
CLS
TEXT 100,10,"3",0,1,1,STR$(A) + " IS SMALLER THEN
100"
PRINT 1
A=A+B
GOTO START
ENDIF
:L2
CLS
TEXT 100,10,"3",0,1,1,STR$(A) + " IS LAGER THEN 100"
PRINT 1
EOP
TEST
Note:
If the result of the expression is nonzero, the statement following THEN will be executed. If the result
of the expression is zero, and the statement following the ELSE is present, it will be executed.
Otherwise the next line of statement is executed.
If there are block of statements in IF…THEN …ELSE, ENDIF must be used at the end of the
IF…THEN …ELSE statement.
Limitations:
The total numbers of nested IF …THEN …ELSE statement in a program cannot exceed 40.

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)