To Next Page

To Previous Page

SET CUTTER OFF

SET KEY1 OFF

SET KEY2 OFF

SET KEY3 OFF

KEY1=0

KEY2=0

KEY3=0

:START

IF KEY1=1 THEN

CLS

TEXT 100,10,"3",0,1,1,"KEY1 (MENU key) is pressed!! "

PRINT 1,1

ELSEIF KEY2=1 THEN

CLS

TEXT 100,10,"3",0,1,1,"KEY2 (PAUSE key) is pressed!!"

PRINT 1,1

ELSEIF KEY3=1 THEN

CLS

TEXT 100,10,"3",0,1,1,"KEY3 (FEED key) is pressed!!"

TEXT 100,60,"3",0,1,1,"End of test"

PRINT 1,1

SET KEY1 ON

SET KEY2 ON

SET KEY3 ON

END

ENDIF

GOTO START

EOP

DEMO

Other manuals for TSC TTP-244 Plus

Questions and Answers:

Need help?

Do you have a question about the TSC TTP-244 Plus and is the answer not in the manual?

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)