TSC TTP-244 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 195 Copyright 2013 All Rights Reserved.
Execute:
Syntax
Receive “PRINT m”
Print Out
SET PRINTKEY ON or
SET PRINTKEY AUTO
1.) PRINT 2
Label 1~2
2.) Press FEED key
Label 3~4
Syntax
Receive “PRINT m,n”
Print Out
SET PRINTKEY ON or
SET PRINTKEY AUTO
1.) PRINT 1,2
Label 1, Label 1
2.) Press FEED key
Label 2, Label 2
Syntax
Receive “PRINT -1,n”
Print Out
SET PRINTKEY ON or
SET PRINTKEY AUTO
1.) PRINT -1,2
Label 1, Label 1
2.) Press FEED key
Label 1, Label 1
Syntax
Receive “PRINT m”
Print Out
SET PRINTKEY 5
1.) PRINT 2
Label 1~2
2.) Press FEED key
Label 3~7
Syntax
Receive “PRINT m,n”
Print Out
SET PRINTKEY 5
1.) PRINT 1,2
Label 1, Label 1
2.) Press FEED key
Label 2~6
Syntax
Receive “PRINT –1,n”
Print Out
SET PRINTKEY 5
1.) PRINT -1,2
Label 1, Label 1
2.) Press FEED key
Label 1, Label 1

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)