TSC TTP-244 Plus Programming Manual

2012/11/27
Add WHILE … WEND command.
Ernest
2012/11/27
Add DO … LOOP command.
Ernest
2012/11/27
Add TEXTPIXEL() command.
Ernest
2012/11/27
Add BARCODEPIXEL() command.
Ernest
2012/11/27
Add GETSENSOR() command.
Ernest
2012/11/27
Add GETSETTING() command.
Ernest
2012/11/28
Revise SET CUTTER command.
Ernest
2012/11/28
Revise OPEN command.
Ernest
2012/11/28
Revise FOR … NEXT LOOP command.
Ernest
2012/11/28
Add CLOSE command.
Ernest
2012/11/28
Add COPY command.
Ernest
2012/11/28
Add MPDF417 command for Micro PDF 417 barcode.
Ernest
2012/11/30
Add EOJ command.
Ernest
2012/11/30
Add DELAY command.
Ernest
2012/11/30
Add DISPLAY command.
Ernest
2012/11/30
Add XOR$() command.
Ernest
2012/11/30
Add _MODEL$ variable.
Ernest
2012/11/30
Add _SERIAL$ variable.
Ernest
2012/11/30
Add _VERSION$ variable.
Ernest
2012/11/30
Revise LIMITFEED command.
Ernest
2012/11/30
Revise BOX command.
Ernest
2012/11/30
Add SET FEED_LEN command.
Ernest
2012/12/20
Add external Wi-Fi module setting commands.
Ernest
2012/12/20
Add Ethernet setting commands.
Ernest
2012/12/24
Revise DMATRIX command.
Ernest
2012/12/24
Revise LIMITFEED command.
Ernest
2012/12/24
Revise SELFTEST command
Camille
2013/2/5
Add sample result for each section
Camille
2013/2/6
Add CODEPAGE 864 (Arabic) ; since F/W V7.0
Camille
2013/2/26
Add <ESC>!F command.
Camille
2013/2/26
Add <ESC>!. command.
Camille

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)