To Next Page

To Previous Page

Example

Downloading BMP file into printer by DiagTool

Sample Code

SPEED 2

DENSITY 3

SIZE 4,1.5

GAP 0,0

DIRECTION 1

CLS

PUTBMP 10,10,"SAMPLE.BMP"

BLOCK 10,180,240,100,"2",0,1,1,"bpp and contrast are omitted."

PUTBMP 300,10," SAMPLE.BMP",1,80

BLOCK 300,180,240,100,"2",0,1,1,"bpp = 1

contrast = 80"

PUTBMP 590,10," SAMPLE.BMP",8,80

BLOCK 590,180,240,100,"2",0,1,1,"bpp = 8

contrast = 80"

PRINT 1

Result

Other manuals for TSC TTP-244 Plus

Questions and Answers:

Need help?

Do you have a question about the TSC TTP-244 Plus and is the answer not in the manual?

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)