Unipulse F325 User Manual

127
13 Options
127
Options
Chapter
13
- Read status 2
- Read status 3
* When reading after digital zero is performed, it turns ON only once.
It remains OFF until digital zero is performed again.
- Write setting values
* Refer to P.129 “■ Setting value communication format” for setting value No.
- Read setting value
* Refer to P.129 “■ Setting value communication format” for setting value No.
- Zero calibration
Host
F325
RD 0 0 0 0 0
0
Terminator
RCRD
0
Undefined
LO output signal
OK output signal
HI output signal
Near zero output signal
Stable output signal
Hold output signal
0: OFF 1: ON
0: OFF 1: ON
0: OFF 1: ON
0: OFF 1: ON
0: OFF 1: ON
0: OFF 1: ON
Host
F325
RE 0 0 0 0 0
0
Terminator
RCRE
0
DZ response output * 0: OFF 1: ON
Undefined
Host
F325
Ｗ
Setting value
CR
* No return data
Setting value
(5-digit, no decimal point)
Sign (0, + or -)
No.
Host
F325
Ｗ
Ｗ
CR
Setting value No.
Setting value
Terminator
Setting value
(5-digit, no decimal point)
Sign (0, + or -)
No.
Host
F325
CA
N0A
Calibrating
CR
0: Normal end
2 to 7: Calibration error No.
L: Calibration LOCK (calibration not possible)
R: Calibrating
Terminator

Unipulse F325 Specifications

General

Brand	Unipulse
Model	F325
Category	Measuring Instruments
Language	English