67
9 System Settings and Operations
67
System Settings and Operations
Chapter
9
9-2. Password
By inputting a password, memory contents can be rewritten (initialized) to the factory default
contents.
Calibration values (zero calibration, span calibration) remain unchanged; however, other setting
values can be rewritten to the factory default values.
■Password setting method
1.
Select setting mode 4.
→ (three times)
2. Set "password".
Press the key eight times.
Set the password using the
(numerical value input) and (shift) keys, and
confirm it with the key.
Initialization is complete once the tone sounds.
(Do not operate keys until the tone sounds.)
Password
1239: Initialization
- Refer to P.146 “16.Setting Values List” for initialized values.
- Refer to P.68 “9-3.Self-check/Initialization” if self-check and initialization are to
be simultaneously performed.
Key points
To Next Page
Loading...
Need help?
General
