35
4 Calibration
35
Calibration
Chapter
4
4-11.Calibration LOCK
This function prohibits changes to the setting to prevent calibration values from being changed by
operational errors.
■Calibration LOCK setting method
1.
Select setting mode 3.
→ (twice)
2. Select "calibration LOCK".
Press the key twice.
Switch the “calibration LOCK” to ON (1) using
the keys, and confirm it with
the key.
3. Press the key to return to the indicated value display.
Calibration LOCK
1: ON
0: OFF
Refer to P.146 “16.Setting Values List” for setting items locked by the calibration
LOCK.
When the calibration LOCK is released, digital zero is not valid from the front panel
key. (Input from the rear panel DZ is also invalid.)
As soon as calibration is complete, make sure to switch the calibration LOCK ON.
To Next Page
Loading...
Need help?
General
