Unipulse F325 - Digital Offset Setting; ZERO Key Valid;Invalid Setting

43
5 Settings and Operations Related to Indicated Values
43
Settings and Operations Related to
Indicated Values
Chapter
5
5-9. Digital offset
This is a function to subtract a setting value from an indicated value. The value obtained by
subtracting a setting value from an indicated value is displayed when digital offset is set. This
function is convenient when zero cannot be obtained with no load for some reason or when offset is
implemented.
(Indicated value displayed) = (actual indicated value) - (digital offset setting value)
■Digital offset setting method
1.
Select setting mode 1.
2. Set "digital offset".
Press the key five times.
Set the digital offset using the
(numerical value input) and (shift) keys,
and confirm it with the key.
Press the key to insert a minus sign.
3. Press the key to return to the indicated value display.
5-10.ZERO key valid/invalid
This function validates/invalidates ZERO key operations.
■ZERO key valid/invalid setting method
1.
Select setting mode 3.
→ (twice)
2. Set "ZERO key valid/invalid".
Press the key three times.
Set the ZERO key valid/invalid using
the keys, and confirm it with
the key.
3. Press the key to return to the indicated value display.
FNC
＋ －
Digital offset
(-19999 to 19999)
CAL
HOLD
GAIN
CAL
ZERO
HOLD
FNC
＋ －
FNC
＋ －
FNC
＋ －
ZERO
1: Invalid
0: Valid
Zero key operation
CAL
HOLD
GAIN
CAL
HOLD
FNC
＋ －