Introduction
I
Introduction
I
Introduction
F325 is a digital indicator for strain gauge type sensors (DIN96×48mm size).
It is ideal for the quality control of production lines such as pressure load control (press, pressure, force,
etc.) and torque control of rotating machines.
RS-485 (Protocol is Modbus-RTU or UNI-Format.) is equipped as standard and can be easily introduced to
a constituent system using Modbus protocol.
Be sure to read this operation manual before use in order to take full advantage of the superb quality of the
F325 and to use it properly and safely. Use this indicator with accurate understanding of the contents. Keep
this operation manual in a safe place to be used for further reference.
Safety precautions
Make sure that installation, maintenance, and inspection of the F325 are performed by personnel with
electrical expertise.
In this manual, precautions for safe use of the F325 are separately described as and
in the following text. The precautions described in this text are important contents related to
safety. Use this indicator with accurate understanding of the contents.
Be sure to read for safety.
Warning
Events that may cause death or severe injury to personnel in the event of misuse.
Caution
Events that may cause injury to personnel or material damage in the event of misuse.
To Next Page
Loading...
Need help?
General
