Universal Robots UR30 - Cybersecurity Threat Assessment; General Cybersecurity; Cybersecurity Requirements

10.Cybersecurity Threat Assessment
Description
This section provides information to help you strengthen the robot against potential
cybersecurity threats. It outlines requirements for addressing cybersecurity threats and
provides security hardening guidelines.
10.1. General Cybersecurity
Description Connecting a Universal Robots robot to a network can introduce cybersecurity risks.
These risks can be mitigated by using qualified personnel and implementing specific
measures for protecting the robot's cybersecurity.
Implementing cybersecurity measures requires conducting a cybersecurity threat
assessment.
The purpose is to:
•
Identify threats
•
Define trust zones and conduits
•
Specify the requirements of each component in the application
WARNING
Failure to conduct a cybersecurity risk assessment can place the robot
at risk.
•
The integrator or competent, qualified personnel shall conduct a
cybersecurity risk assessment.
NOTICE
Only competent, qualified personnel shall be responsible for
determining the need for specific cybersecurity measures and for
providing the required cybersecurity measures.
10.2. Cybersecurity Requirements
Description Configuring your network and securing your robot requires you to implement the threat
measures for cybersecurity.
Follow all the requirements before you start configure your network, then verify the robot
setup is secure.
User Manual 162 UR30
10.Cybersecurity Threat Assessment
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.