Universal Robots UR30 - Accessing Robot Data

To use the
save
options
Save...Depending on the program/installation you load-create, you can:
•
Save All to save the current Program and Installation immediately, without the system
prompting to save to a different location or different name. If no changes are made to
the Program or Installation, the Save All... button appears deactivated.
•
Save Program As... to change the new Program name and location. The current
Installation is also saved, with the existing name and location.
•
Save Installation As... to change the new Installation name and location. The current
Program is saved, with the existing name and location.
15.5. Accessing Robot Data
Description Use the About option to access and display different types of data about the robot.
You can display the following types of robot data:
•
General
•
Version
•
Legal
UR30 201 User Manual
15.Maintenance and Repair
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.