Universal Robots UR30 - Initializing the Robot Arm

When you boot the robot for the first time, please follow these steps:
1. Select the correct robot arm size.
2. Select the correct control box.
3. Add the serial number as it is written on the robot arm.
4. End with the OK button.
7.3. Initializing the Robot Arm
To initialize
the robot
On your first start up a Cannot Proceed dialog box can appear.
Select Go to initialization screen to access the Initialize screen.
User Manual 54 UR30
7.First Boot
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.