Universal Robots UR30 - Powering down the Robot

1. On your Teach Pendant, press the power button to turn on the control box.
2. Wait as text from the underlying operating system, followed by buttons, appear on the
screen.
3. A Getting Started screen can appear, prompting you to begin programming the robot.
7.5. Powering Down the Robot
To power
down the
robot arm
WARNING
Unexpected start-up and/or movement can lead to injury
•
Power down the robot arm to prevent unexpected start-up during
mounting and dismounting.
1. Press the power button on the Teach Pendant to turn off the robot.
2. Unplug the mains cable / power cord from the wall socket.
3. Allow 30 seconds for the robot to discharge any stored energy.
User Manual 56 UR30
7.First Boot
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.