Universal Robots UR30 - Control Box Clearance

6.5. Control Box Clearance
Description The flow of hot air in the Control Box can result in equipment malfunction. The
recommended Control Box clearance is 200mm on each side for sufficient cool airflow.
WARNING
A wet Control Box can cause fatal injury.
•
Make sure the Control Box and cables do not come into contact
with liquids.
•
Place the Control Box (IP44) in an environment suited for the IP
rating.
UR30 47 User Manual
6.Assembly and Mounting
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.