Universal Robots UR30 - Page 31

WARNING: HOT SURFACE
Prolonged contact with the heat generated by the robot arm and the Control Box,
during operation, can lead to discomfort resulting in injury.
•
Do not handle or touch the robot while in operation or immediately after
operation.
•
Check the temperature on the log screen before handling or touching the
robot.
•
Allow the robot to cool down by powering it off and waiting one hour.
CAUTION
Failure to perform a risk assessment prior to integration and operation can
increase risk of injury.
•
Perform a risk assessment and reduce risks prior to operation.
•
If determined by the risk assessment, do not enter the range of the robot
movement or touch the robot application during operation. Install
safeguarding.
•
Read the risk assessment information.
CAUTION
Using the robot with untested external machinery, or in an untested application,
can increase the risk of injury to personnel.
•
Test all functions and the robot program separately.
•
Read the commissioning information.
NOTICE
Very strong magnetic fields can damage the robot.
•
Do not expose the robot to permanent magnetic fields.
READ MANUAL
Verify all mechanical and electrical equipment is installed according to relevant
specifications and warnings.
User Manual 32 UR30
4.Safety
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.