Vaisala HMT370EX - Calibration and Adjustment; Calibration and Adjustment Overview

10. Calibration and adjustment
10.1 Calibration and adjustment overview
Figure 61 Insight PC software calibration view example
Figure 62 Local display calibration menu
The RH and T measurement of the probe used in the HMT370EX transmitter can be calibrated
and adjusted (1-point or 2-point adjustments) using one of the following alternative
configuration options:
• Detaching the probe body from the transmitter and connecting the probe to Insight PC
software (requires M12 Indigo USB Adapter cable accessory (Vaisala item USB2)).
• Calibrating and adjusting the probe with Insight PC software when the probe is attached
to the transmitter (requires M8 USB cable accessory 219690).
• Calibrating and adjusting the probe with the local display interface of the transmitter
when the probe is attached to the transmitter.
Chapter 10 – Calibration and adjustment
119