6.3.1 Display menu
Figure 50 Display menu
In the Display menu, you can select which parameters are shown on the display, change the
local display interface language, and configure graph, unit, display timeout, menu access PIN
code, and color theme options.
Displayed
parameters
Select which measurement parameters are shown on the display. Up to 4
parameters can be shown simultaneously.
Language Set the local display interface language. The available options are English,
German, French, Japanese, and Chinese.
Graph Set the measurement parameters shown as graphs and the time period
visualized in the graph.
Units Set the display interface to show units either as metric or non-metric.
Menu PIN
code
Enable or disable using the fixed PIN code to restrict access to configuration
menus.
Timeout Define the time after which the screen enters power saving mode (sleep
mode) if not used.
Theme Set the display interface to use either a Light or Dark color theme.
If you have selected a wrong language and need to change the display language,
see the instructions in Problems and their possible solutions (page 128). You can
also change the display language by connecting the transmitter to the Insight PC
software.
Chapter 6 – HMT370 local display interface
99
To Next Page
Loading...
