The Status menu contains options for viewing information about the operation of the device:
transmitter and probe status messages, output and measurement status, and general
information on the device.
Device status Device operation information such as notifications and errors.
Output status Shows the current statuses of analog output 1 and 2 (output level and
measurement).
Measurement status Shows the current status or statuses of each measurement parameter
(for example, OK or Measurement not ready).
About Device information (software version and manufacturing date).
6.6 Maintenance menu
Figure 54 Maintenance menu
In the maintenance menu, you can restart the transmitter and restore transmitter settings back
to factory defaults.
Adjustments made to probe measurement will remain in place also after a
transmitter factory reset, as probe adjustments are stored in probe memory.
HMT370EX User Guide M212305EN-B
102
To Next Page
Loading...
