For instructions on connecting to Insight, see Connecting to Insight PC software (page 103).
For an overview of the Insight software, see Vaisala Insight PC software (page 103).
Table 5 LED status indicator states
LED color Meaning
Not lit Power o.
Green, fast blinking Starting up.
Green, not blinking Power on, normal measurement.
Green, slow blinking Notification or warning, normal measurement. Connect to Insight
to view status information and configure.
Red Error. Connect to Insight to view status information and
configure.
Red and blinking Critical error. Connect to Insight to view status information and
configure.
2.6 Connectivity to Vaisala Insight software
The HMT370EX transmitter and HMT370EX series probes can be connected to Vaisala Insight
software either together as one unit or separately with a Vaisala USB cable (see Spare parts
and accessories (page 141)). With the Insight software, you can:
• Calibrate and adjust the measurement.
• Test and adjust the analog outputs.
• Configure analog output parameter selection, scaling, error, and clipping settings.
• Configure environmental compensations, measurement settings, and local display
settings.
• View real-time measurements and device and status information.
More information
‣
Connecting to Insight PC software (page 103)
Chapter 2 – Product overview
15
To Next Page
Loading...
