The transmitter body enclosure must not be opened in an explosion
hazardous area, unless a safe work permit has been issued in accordance with
the standard IEC 60079-14. Either remove the transmitter from the hazardous
area before opening the enclosure, or ensure that an IEC 60079-14 compliant
safe work procedure has been implemented in the hazardous area.
CAUTION!
The output parameters of the multimeter must be compatible with the input
parameters of the transmitter.
For instructions on connecting the multimeter to the test points and testing the analog output
level, see Analog output level test (page 111).
Chapter 10 – Calibration and adjustment
123
To Next Page
Loading...
