Vatech Smart Plus PHT-35LHS - Page 145

Smart Plus (PHT-35LHS)
Technical Manual
VT-TECH-Smart Plus-001
143 / 188
COPYRIGHT© 2018 VATECH.
ALL RIGHTS RESERVED
② Exit VAKCAP. Acquire the PHANTOM image again and measure the Pixel Number at the
center of PHANTOM.
③ Repeat the procedures until the X value at the center of PHANTOM meets the standard.
13) Send [SPM_UDTT_####], [SPM_UFTT_####], [SPM_UDTT_####] to the system.
(####: UBTT Value that meets the standard)